Foxwell NT680 Pro success for: Audi Service Maintenance Light reset works.
Here we go for how-to guide:
This is Audi A6 and I am sure it works with any Audi from the year 2011 to 2018.
The oil change that’s an easy reset that you can do it in the MMI system.
But the next inspection that I already reset it.
So I figured I’ll show you how to do it too, but usually it’ll pop up a little symbol up here and then every time you turn on the car every time you turn off the car it’ll say expect you shouldn’t do, so Let me show you, a friend actually lend this to me the Foxwell NT680 Pro.
And I asked I got online I got on the forums and try to figure out nobody knows how to use it and I kind of figured it wasn’t that hard because I guess everyone uses the vcds or the OB11 I guess that’s more specific for Audis.
Alright, I’m gonna teach you how to reset next inspection, I was just any sentence of 10,000 equals 15,000, but every set is 3700, yes that’s why I want to play with it anytime soon, that’s gonna take me at least two years of.
First, you gotta connect, make sure the car is on but the ignition is off, so just press this button one time (look at image below).
I guess the ac works was done.
Alright, then Foxwell NT680 Pro is gonna light up so pretty much, go to “Maintenance”.
Select “Oil reset” and “Enter”.
Go to “Europe” and “Audi”.
Go to “Auto reset”, if automatic reset is not successful, please refer to the manual reset.
Go to “OldMode” to have a try, if the current mode cannot be reset, please use another model.
Go to “High maintenance”.
I should know what’s wrong. What’s a small maintenance, actually, you know what let’s backtrack and one more time for “High maintenance”, because I didn’t know what I was doing so I went to high maintenance, and I reset this one 60,000
Then I went back, I wanna reset it.
And I went back to the “small maintenance”.
We said 15,000, okay, complete.
Okay, we’ll go back over here to check “Next inspection”, alright, it works.
Foxwell NT680 Pro is pretty much as good, sweet and simple.