Foxwell NT530 1998 bmw m3 e36 oil / service / maintenance reset
Have 1998 BMW M3 e36 to reset oil/ service / maintenance, Foxwell NT530 is able to do this job manually instead of automatically. […]
Foxwell NT530 BMW scanner
Use Foxwell NT530 to monitor BMW gearbox oil temp
Confirmed: used Foxwell NT530 scanner to monitor the gearbox oil temp for BMW 5 series. (you’ll also find engine & oil temps here) during an […]
BMW E46 no CEL P0170 and P0173 codes show up, any tips?
Have BMW 2000 323 ci E46, tried to get it ready for DEQ, I have no CEL but Cheap-o-code reader shows P0170 and P0173 -Fuel […]
2002 BMW 530I started at low idle, read DTCs by Foxwell NT530
Have 2002 BMW 530I, it started at very low idle, gave it gas but no response. hold it to the floor and it is as […]
BMW E32 Code 54 Torque Converter Lockup Clutch troubleshot by Foxwell
Usually I encounter some more difficult problems, and I will record the process of solving these problems. This time the problem is the same, the […]
Foxwell NT530 BMW scanner is better than Foxwell NT520 BMW scanner
Foxwell NT530 BMW scanner is better than Foxwell NT520 BMW scanner in the following aspects: Foxwell NT530: fully-new outlook and advanced configuration. Foxwell […]
