Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

Foxwell NT510 Elite OBD2 Scanner is confirmed to reset your throttle body position sensor on a 2008 – 2012 Honda Accord, Honda Civic, Honda RAV4 or other Honda vehicle with an electronic throttle body.

 

Difficulty: Easy

Time Spent: 15 minutes

Be SURE to get the Honda/Acura version of the Foxwell NT510 Elite

 

Step 1: Plug NT510 Elite Scanner into the OBD2 Port

Plug Foxwell NT510 Elite into your Honda while your vehicle is turned OFF and the key is removed. You can find your OBD2 port underneath the steering wheel. On my Honda Accord, it was located along the top of the left kick panel on the drivers side.

Plug your Foxwell into the port, then turn your key to the ‘On’ position without starting your vehicle.

 

  1. Turn your key to the ON position without starting your vehicle.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. 2009 Honda Accord OBD2 port location.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Honda Accord OBD2 port with the Foxwell plugged in.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

Step 2: Navigate to the “TP POSITION CHECK” on Foxwell

Once you’ve turned your key to the “On” position (vehicle not started), your Foxwell Scanner will power on to the home screen and you’ll need to navigate through the menus to find the Throttle Control Position Reset. To do this, there are a series of menus that you’ll need to get through, a quick load/read, and then you’ll find your “TP POSITION CHECK” selection. *NOTE that this selection process might be different between a standard NT510 and an NT510 elite.

To navigate through the menus to find your “TP POSITION CHECK” to reset the position sensor on your throttle body, follow the steps below in the images.

  1. Once you turn your key to the “on” position, the NT510 will bring you to the home screen.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Select the Honda icon and press the Enter button.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Select the #2 “Control Modules” and press enter.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Select the #1 option “Engine Control System (PGM-FI)”.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Once you’ve selected the Engine control system, it will “Load data” and “Read”.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Once your Foxwell has loaded, select the #5 “Special Functions”.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Behold, your “TP Position Check” selection!

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

Step 3: Reset the “TP Learning Value”.

Now that you’ve finally found the throttle body position sensor reset in your Foxwell through seven different menus, you’re ready to reset it. Select the “TP POSITION CHECK” option and go through the sequence. Follow the instructions below in the images to reset the position sensor value.

 

  1. Once you’ve selected the “TP position check” option, it will ask you to confirm the position. Continue by selecting “F3” on your Foxwell.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. It will now ask you to reset the TP learning value. Select Yes by using the “F3” button on your Foxwell.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

  1. Done! You’ll now see your confirmation that the throttle body position sensor has been reset and to now follow the reset process in your service manual.

Honda Accord Civic throttle body relearn with Foxwell NT510 Elite

 

Step 4: Relearn Process

Now that you’ve reset your Throttle Position Sensor, you need to let the vehicle relearn the position. I searched and found a series of different ways to do this. My recommendation is to find your service manual for your year make and model of Honda and to follow it. Again, the process I did below worked for ME and MY Honda but may not work with yours.

 

To start the relearn process, turn your vehicle off after you’ve reset the position sensor (if it’s still on). Turn all of your accessories off – your stereo, lights, AC, heat. Everything must be off. Turn the key to the “ON” position for two seconds then start your vehicle. Let the vehicle sit without touching the throttle or anything until it comes up to operating temperature. You’ll know it’s at operating temperature once the fans cycle two times. Once at operating temperature, let the vehicle sit at idle for an additional 5-7 minutes. This was the procedure I used and once it was completed, my Honda idled perfect again and all of the issues I was experiencing after cleaning the throttle body were gone!

 

Alright, there is not only one shop is available with Foxwell NT510 Elite, but I’d like to recommend

https://www.foxwelltool.com/wholesale/nt510-multi-system-scanner-with-one-fre-car-brand-software-and-obd.html

(Visited 290 times, 1 visits today)
Honda Accord Civic throttle body relearn with Foxwell NT510 Elite
Share