Foxwell NT680pro db15 pin cable needed

News! DB15 pin cable is already contained in the Foxwell NT680 Pro scanner (with all adapter) package.

Several days ago, foxwelltool.com receive one email:

I recently purchased an Foxwell NT680pro scanner with all adapters (SC406-CFull). Everything arrived but the adapters have female DB15 connector and the 680 came with a DB15 to OBD2 cable, no DB15 cable for the adapters so the adapters are useless. Also, the OBD2 cable that came with the 680 does not fit all OBD2 ports properly. I have confirmed my other OBD2 cables for other tools work fine but the Foxwell cable must not be molded just right, it will NOT fit on my 2014 Honda, but works fine on other vehicles.

Please look at the images below. In the picture below the cable is called “Diagnosis Cable” and that cable is missing.

Foxwell Nt680 Pro Db15 Pin Cable 01

 

The main cable that follows the NT680Pro cannot be used with the adapter set:

Foxwell Nt680 Pro Db15 Pin Cable 02

 

Foxwelltool.com reply:

I checked with factory, you need a db15 pin cable to connect between the connectors and the NT680 pro package.

This cable is not included in the NT680 pro full package. But we can ship it to you for free of charge by by Post, with no tax.

To be informed: Only you purchase Foxwell NT680 Pro full package(SC406-CFull), can you get one extra free DB15 cable if you need actually.

Foxwell Nt680 Pro Db15 Pin Cable 03 Foxwell Nt680 Pro Db15 Pin Cable 04

One more question:

I own the Foxwell GT80 but I looking the NT644  my quest is it the connectors from the Gt 80 can be use with the nt644 ?

Reply: The GT80 connector can used on NT644 Pro , but it need a DB15 cable.

(Visited 66 times, 1 visits today)
Share
Share